HiFiCompass

Zaph Audio ZA14W08 5" Aluminum Cone Mid/Woofer

You are here

»
»
»
Zaph Audio ZA14W08 5" Aluminum Cone Mid/Woofer
  • Visit the ZA5 Family of Speaker Kits using this driver.
  • Strategically placed Faraday rings in the motor allow for low non-linear distortion and limited inductance change through the voice coil's range of travel.
  • A formed aluminum alloy cone provides very flat response within its passband and a breakup node that is high in frequency for extended usable bandwidth.
  • Machined aluminum phase plug eliminates compression and reflection that would normally occur under a dustcap and promotes cooling of the voice coil.
  • Tinsel leads are mounted to opposite sides of the voice coil former to promote even cone loading.
  • Rigid cast metal frame of an open design includes ventilation under the raised spider.
  • Flat linear spider provides uniform restoring force throughout the voice coil's range of travel.
  • Integrated gasket for airtight seal and vibration resistance.
  • Rubber surround
$53.00
Nominal Impedance 8 ohm
DC Resistance (Re) 7.1 ohm
Voice Coil Inductance (Le@1K) 0.37 mH
Effective Piston Area (Sd) 68 cm2
Voice Coil Diameter 25.4 mm
Voice Coil Height 10.5 mm
Voice Coil Layers 2  
Air Gap Height 4 mm
Linear Coil Travel X-max (p-p) 6.5 mm
Magnet Weight 0.44 kg
Net Weight 1.10 kg
Free Air Resonance 65.8 Hz
Sensitivity (2.83V/1m) 87 dB
Mechanical Q-factor (Qms) 2.13  
Electrical Q-factor (Qes) 0.56  
Total Q-factor (Qts) 0.44  
Moving Mass (Mms) 7.2 g
Force Factor (BL) 6.15 Tm
Equivalent Volume (Vas) 5.23 l
Compliance (Cms) 0.80 um/N
Rated Power Handling 60 Watt
Overall diameter 138 mm
Cutout diameter 114 mm
Flange thickness 4.5 mm
Depth 66 mm

Bolt Hole Circle at 127mm
Hole diameter 4mm
4 equally spaced holes

 

Your little gratitude = a huge motivation for us and an invaluable contribution to the website's future! 

Poll

Your favorite power amp type

Class-D
44% (891 votes)
Tube SE
13% (255 votes)
BJT based push-pull
12% (247 votes)
FET based push-pull
11% (226 votes)
Tube push-pull
8% (162 votes)
Hybrid (tube+solid state)
6% (126 votes)
FET based SE
6% (125 votes)
Total votes: 2032
All polls

 

All the best components for audio in one place!

More...  

CONTACTS